Concrete Mixing Plant Maintenance Guide In Autumn & Winter

With the arrival of autumn, the temperature gradually drops, and the maintenance work of concrete mixing plant becomes especially important. In the northern region, the temperature difference between day and night increases and the sandy weather increases, which brings a great impact on the machinery and equipment of concrete mixing plant. Therefore, autumn maintenance is imperative for concrete mixing plants. Doing a good job of autumn maintenance not only can increase the service life of the equipment, but also is an effective way to improve the efficiency.
For the autumn maintenance of concrete mixing plant, the main points are as follows:
1. the main mixing machine needs to be cleaned and maintained regularly. For example, check the gap between mixing blade, liner and scraper, check whether the mixing machine has the phenomenon of holding shaft, check whether the discharge door and loading hopper are flexible and airtight, etc.. If there is any problem, it should be overhauled in time.
2. The maintenance of each important auxiliary parts is also very important. In autumn, the temperature difference between day and night increases, after the concrete mixing plant ends a day's work, the residual water in the water tank, admixture pump and water pump should be cleaned up to prevent the pump pipe from being damaged by icing at night.
3. Maintenance is needed for the belt conveyor loading system. The belt conveyor in concrete mixing plant plays an important role in conveying materials, in which the electric pulley needs to be replaced after working for a certain period of time, and the oil needs to be changed diligently. Before changing the oil, all the internal oil of the reducer should be drained, then rotate the drum and turn the two oil plugs away at the same time and rotate them to the low position. The amount of oil filling inside the speed reducer motor must be strictly in accordance with the value in the nameplate. Too much or too little oil will affect the normal operation and efficiency of the drum motor.
4. The parts that need to be checked after a week of using the concrete mixing plant include: check whether there are signs of loosening of the fixing screws of each part of the liner of the mixing plant, check whether the contactor in the electric appliance is damaged or burnt, check the quality of the lubricating oil in the air compressor box and replace it if necessary, check the wear of the mixing arm, blade and scraper, replace and adjust the gap if necessary.
After the autumn, the maintenance of concrete mixing plant should be done as much as possible to avoid the problem of equipment failure due to the climate.
ZOOMJO focuses on the design, manufacture and sales of concrete mixing plants, and is one of the leading concrete mixing plant manufacturers in China.
ZOOMJO's products cover various models of concrete mixing plants, including different types of mobile, stationary, wheeled, modular and so on, which can meet different needs of customers. All the products are made of high quality steel and components to ensure the durability and reliability of the products, and also focus on the safety performance of the products to guarantee the production safety of users.